These BSC hydrofoil kits come with your choice of Front wing, Rear wing, short red fuselage, 19mm mast base plate, 19mm mast doodad connector, 19mm 75cm aluminum mast, Axis stainless steel hardware set, and wing covers for front and rear. A complete kit, everything you need to ride. The BSC 890 comes with the black ultrashort fuselage.

Our broad spectrum carve series, the ultimate all-rounder, and the place to start your foiling journey.

Our Original Series (1020, 920, 820) performed admirably during the first generation of foiling water sports and are still ideal beginner foils. When it was time to replace this model, we set out to significantly improve speed and range, without losing the easy lifting properties we all loved about the original series.

For the BSC range we completely changed the outline, increasing aspect ratio and reducing thickness for vastly improved speed and glide, while incorporating what we had learned from the HPS project in turn down and twist for optimum turning. However, like the Original, we developed a foil section with a high stall angle. This means it still operates well at slow speeds, so will be forgiving when you make a mistake gybing on a Wind foil or Wing foil. It will also get you up easily and keep you foiling when surfing slow or weak waves.

The result is a foil that has an incredibly wide range of operation – the ultimate all-rounder. One day you could be foiling tiny waves on your SUP, the next you could be screaming across the harbour with a hand wing, all on the same foil.

The 810 BSC foil has quickly become our most popular prone foil, while the 1060 is the foil of choice for first season wing foilers. BSC is the go-to for SUP foiling too. If you want to wing and SUP foil with one setup, the BSC will be the ideal choice.

BSC foils are ideally matched with our Freeride Small, Freeride, Progressive or Speed rear wing ranges.

BSC 1120 Carbon Hydrofoil Wing Technical Data

WINGSPAN: 1120 mm / 44inches
MAX CHORD: 220mm / 8.6inches
ASPECT RATIO: 6.25
ACTUAL AREA 2102 square cm / 326 square inches
PROJECTED AREA: 2007 square cm / 311 square inches
VOLUME: 3581 cubic cm / 219 cubic inches

BSC 1060 Carbon Hydrofoil Wing Technical Data

WINGSPAN: 1060 mm / 42 inches
MAX CHORD: 200mm / 8 inches
ASPECT RATIO: 6.51
ACTUAL AREA 1803 square cm / 278 square inches
PROJECTED AREA: 1726 square cm / 268 square inches
VOLUME: 2800 cubic cm / 171 cubic inches

BSC 970 Carbon Hydrofoil Wing Technical Data

WINGSPAN: 970 mm / 38.2 inches
MAX CHORD: 190mm / 7.5 inches
ASPECT RATIO: 6.27
ACTUAL AREA 1572 square cm / 244 square inches
PROJECTED AREA: 1501 square cm / 233 square inches
VOLUME: 2313 cubic cm / 141 cubic inches

BSC 890 Carbon Hydrofoil Wing Technical Data

WINGSPAN: 890 mm / 35inches
MAX CHORD: 170mm / 6.7inches
ASPECT RATIO: 6.43
ACTUAL AREA 1290 square cm / 200 square inches
PROJECTED AREA: 1232 square cm / 191 square inches
VOLUME: 1697 cubic cm / 104 cubic inches

BSC 810 Carbon Hydrofoil Wing Technical Data

WINGSPAN: 810 mm / 32 inches
MAX CHORD: 155mm / 6/1inches
ASPECT RATIO: 6.42
ACTUAL AREA 1070 square cm / 166 square inches
PROJECTED AREA: 1022 square cm / 158 square inches
VOLUME: 1284 cubic cm / 78 cubic inches

BSC 740 Carbon Hydrofoil Wing Technical Data

WINGSPAN: 740 mm / 29.13 inches
MAX CHORD: 140mm
ASPECT RATIO: 6.49
ACTUAL AREA 883 square cm / 136.9 square inches
PROJECTED AREA: 844 square cm / 130.8 square inches
VOLUME: 757 cubic cm / 46 cubic inches

Axis BSC Broad Spectrum Carve Hydrofoil Package