Gen 2 Motor Systems

Gen2 utilizes the same robust motor, propellers and mast adaptor as Gen1 with changes to the system modularity. A custom water resistant motor plug seamlessly connects the electronics box to the motor allowing rider to interchange between a range of different cable lengths. By simply removing 3 bolts and plugging in a new motor, the rider can now have a quiver of motors for different foiling disciplines or preferences.

Gen2 Motor Systems are available in 5 different lengths that are interchangeable. The length being the distance between the base plate and the motor position on your mast. These lengths are shorter than Gen1 as the cable does need have to wrap around to the top side of the board. Each position has been curated for specific use:

15cm/5.9inches We often refer to this position as slammed as it’s as close to the board as possible without noticing interference due to it’s proximity to the board. The ideal for those wanting assistance to get on foil, and have their motor exit as soon as they’re on foil.
20cm/7.8IN (STANDARD) A step down from the slammed position, this is most common for most riders wanting assisted power in most disciplines. The motor remains in the water a little longer meaning you can really rely on it to get you up and running.
25cm/9.8IN Wanting to flatwater Foil Drive back to the lineup? Learning to surf, downwind or wing? The mid mast position gives you enough depth to motor around but remains high enough to pop the motor out of the water once you’re up on foil and feeling ready to glide naturally.
60 & 70cm 23.6 &27.5IN Positions close to the fuselage are ideal for flatwater and learning. A 60cm and 70cm Motor are available with the same use case. The 60cm Motor is suitable for masts up to 60cm long, where as the 70cm Motor is for masts longer than 70cm.

Foil Drive Stator Cable Set Bundle of 2 lengths