33" LCS 55 Carbon Ultra-High Mount Propulsion

Description

The 33" LCS Carbon 55 Ultra-High Propulsion places the motor 7 inches below the board, the highest motor position in Lift's line. Once you're on foil and riding the energy of the water, the motor clears the surface and drag drops to the mast and wing. The 33 inch carbon mast adds ride height over the 32 inch mounts, more room to carve, turn, and pump. It clicks into any LIFTX, LIFT5, or LIFT5 F board through the Lift Connect System and ships with the LCS Folding Glide Propeller installed.

HIGH vs. LOW MOUNT

High mount means earlier lift and no motor
drag.
Low mount is perfect for downwind
sprints and learning.

Why You'll Love It

Motor clears water on foil
33" mast, more ride height
Easier planing, less throttle
One click, tool-free install

Mast Length	33" (84 cm)
Mast Material	Carbon Fiber
Weight (no propeller installed)	9.0 lbs. (4 kg)
Motor Position (rocker to mid-motor)	7" (17.8 cm)
Motor Diameter	55mm
Maximum Sustained Cruising Power	3800W (5.1 hp)
Maximum Sustained Cruising Thrust	Under 95 lbs
Included Propeller	LCS Folding Glide Propeller
Board Compatibility	LIFT5, LIFT5 F, LIFTX

⚠️ IMPORTANT: It is critical all eFoil equipment is turned off and the battery is disconnected before working with or around the motor or propellers.

Avoid contact with the spinning propeller, as it can cause severe injury or death.
Keep your fingers, toes, and body parts clear of the propeller at all times.
Do not handle the propeller while the battery is installed in the board.
Do not handle your propeller in the water.

Compatible with

LIFTX
LIFT5
LIFT5 F

Whats included

33" LCS Carbon Ultra-High Propulsion
LCS Folding Glide Propeller
55mm Propulsion Case

Lift 33" LCS 55 Carbon Ultra-High Mount Propulsion