Select your Propulsion size:

55mm: Propeller only (the 55mm propulsion has the LCS interface built in)
68mm: Propeller Kit (includes LCS Folding Glide Propeller, LCS Base Plate, and LCS Tail Cone)

The LCS Folding Power Propeller is built on Lift's 2026 folding propeller redesign, a reshaped collapse and reinforcement at the highest-stress points. On that foundation, the Power runs its own blade geometry, sized and pitched for thrust and speed. Blades measure 1.8 inches at the widest section, the most blade in the folding line, with 6.3 inches of pitch on a 6 inch diameter. The wider blade drives the takeoff, and the higher pitch carries speed under power. It ships propeller-only for 55mm propulsions, or as a kit with the LCS Base Plate and LCS Tail Cone for any 68mm motor. Construction is aluminum with stainless steel inserts.

Product Material:

Aluminum with stainless steel inserts
Blade Pitch: 6.3" (160 mm)
Blade Diameter: 6" (152 mm)
Blade Width (widest section): 1.8" (46 mm)

Compatibility:

55mm Motor (native)
68mm Motor (with kit)

LCS Propeller Installation Guide

⚠️ IMPORTANT: It is critical all eFoil equipment is turned off and the battery is disconnected before working with or around the motor or propellers.

Avoid contact with the spinning propeller, as it can cause severe injury or death.
Keep your fingers, toes, and body parts clear of the propeller at all times.
Do not handle the propeller while the battery is installed in the board.
Do not handle your propeller in the water.

Lift Folding Power Propeller