Lift LCS Folding Glide Propeller

$990.00
$780.00
The LCS Folding Glide Propeller is built on Lift's 2026 folding propeller redesign, a reshaped collapse and reinforcement at the highest-stress points. On that foundation, the Glide runs its own...

The LCS Folding Glide Propeller is built on Lift's 2026 folding propeller redesign, a reshaped collapse and reinforcement at the highest-stress points. On that foundation, the Glide runs its own blade geometry, sized and pitched for efficiency and glide. Blades measure 1.25 inches at the widest section, the narrowest profile in Lift's folding line, with 5.6 inches of pitch on a 6 inch diameter. The profile folds flat against the hub the moment the motor cuts. It ships standard on every 55mm propulsion and runs on any 68mm motor with the LCS Base Plate and LCS Tail Cone installed. Construction is aluminum with stainless steel inserts.

Product Material: 

  • Aluminum with stainless steel inserts
  • Blade Pitch: 5.6" (142 mm)
  • Blade Diameter: 6" (152 mm)
  • Blade Width (widest section): 1.25" (32 mm)

Compatibility:

  • 55mm Motor (native)
  • 68mm Motor (with kit)

LCS Propeller Installation Guide

⚠️ IMPORTANT: It is critical all eFoil equipment is turned off and the battery is disconnected before working with or around the motor or propellers.

  • Avoid contact with the spinning propeller, as it can cause severe injury or death.
  • Keep your fingers, toes, and body parts clear of the propeller at all times.
  • Do not handle the propeller while the battery is installed in the board.
  • Do not handle your propeller in the water.
  • Before You Buy

    Which Motor Does Your eFoil Have?

    The propeller you need depends on your motor size. Measure the diameter of the circular motor face — the end of your propulsion unit — and match it below.

    1

    Measure across the center of your motor face

    Remove your existing propeller if installed. Using a ruler or calipers, measure straight across the circular end of the motor housing. Match your result to the options below.

    68mm / 2.68"MOTOR DIAMETER
    68mm / 2.68"Motor face diameter

    68mm Motor

    eFoils with this motor size

    • LIFT5All sizes
    • LIFT5 FAll sizes
    • LIFT4All sizes
    • LIFT3All sizes
    • LIFT3 FAll sizes
    Note on the LCS Base Plate:LIFT5 ships with it pre-installed. LIFT5 F, LIFT4, LIFT3, and LIFT3 F have a bare 68mm motor face — the Base Plate is included in the 68mm Kit and installs first.
    55mm / 2.17"MOTOR DIAMETER
    55mm / 2.17"Motor face diameter

    55mm Motor

    eFoils with this motor size

    • LIFTXAll sizes
    No adapters needed.The 55mm propulsion already has the LCS interface built in. The propeller threads directly onto the motor shaft.

    What’s in the Box

    Select your motor size above — here’s exactly what ships to you.

    68mmLIFT5 · LIFT5 F · LIFT4 · LIFT3 · LIFT3 F
    1. 1
      LCS Base Plate
      Mounts to the 68mm motor face
      Included
    2. 2
      LCS Tail Cone
      Installs onto the Base Plate
      Included
    3. 3
      LCS Folding Propeller
      Threads onto the Tail Cone
      Included
    Everything in one box.All 3 components are included in the 68mm LCS Folding Power Propeller — no separate orders needed.
    55mmLIFTX · All sizes
    1. 1
      LCS Folding Propeller
      Threads directly onto the 55mm motor shaft
      Included
    Just the propeller — nothing else needed.No Base Plate, Tail Cone, or adapters required. The 55mm propulsion already has the LCS interface built in.

    Glide or Power?

    Both propellers fit 55mm and 68mm motors. The difference is in the ride.

    LCS Folding Glide Propeller
    Narrowest blade · lowest drag · smoothest surf feel
    Blade Width1.25" (32mm)
    Blade Pitch5.6" (142mm)
    Blade Diameter6" (152mm)
    MaterialAluminum + Stainless Steel Inserts
    Rider level

    BeginnerAdvanced

    Best for advanced riders focused on surf performance, wave glide, and battery efficiency. May not suit heavier riders wanting more drive off the line.

    LCS Folding Power Propeller
    Widest blade · more thrust · higher speed under power
    Blade Width1.8" (46mm)
    Blade Pitch6.3" (160mm)
    Blade Diameter6" (152mm)
    MaterialAluminum + Stainless Steel Inserts
    Rider level

    BeginnerAdvanced

    Best for heavier riders, those wanting maximum drive off the line, and eFoil surfers who want stronger power and higher speed under throttle.

Orders are usually processed and shipped the same day the order is placed. We do our best to get items out as quickly as possible, and are centrally located in Texas so most items will be 2-day shipping even with ground service. Domestic orders to the continental USA are shipped via UPS unless it is a small item. Small items are shipped via USPS. Most International orders are shipped via DHL express. Tracking numbers are available via this site in your account order page. if you want expedited shipping just choose it from the menu or call us at 281-508-6485 for any shipping problems or concerns.