You have no items in your shopping cart.
FoilMount, Hydrofoil Hardware
M6 and M8 Flat Head 316 Stainless Steel Bolts
These are extra 316 stainless steel M6 and M8 bolts for your hydrofoil setup. These are all Flat Head These are all countersunk flat head Stainless Metric Bolts in various...
$0.39
Foil Accessories, FoilMount
$2.50
$2.25
M8 Hydrofoil Track Brass T-Nuts
Extra brass T-nuts for your tracked hydrofoil. These are salt water approved and perfect for all Liquid Force, Lift, Slingshot, etc track systems. They are M8 standard metric threads which...
FoilMount, Hydrofoil Hardware
M8 T-Nuts Stainless Steel each
These are low profile replacement M8 Stainless Steel T-nuts for the any hydrofoil that uses the M8 T-nut, which just about all Tracked hydrofoils.These are low profile meaning they are...
$3.25
Foil Accessories, FoilMount
M8 Flat Head Stainless Steel Hydrofoil Bolts
M8 Stainless Flat head bolts with a 1.25 thread pitch.These are the standard Metric bolts used on most hydrofoil boards. All have a large #4 phillips head drive. The...
$1.50
FoilMount, Hydrofoil Hardware
M8 T-Nuts Stainless Steel Sets of 10
These are low profile replacement M8 Stainless Steel T-nuts for the any hydrofoil that uses the M8 T-nut, which just about all Tracked hydrofoils.These are low profile meaning they are...
$32.00
Foil Accessories, FoilMount
Moses to Slingshot Adapter Plate
Use any size Slingshot mast with your Moses setup. All Slingshot flight school masts 18", 24", 28", full length 35.4" kite mast, or 28" surf mast will work with this...
$70.00
Foil Accessories, FoilMount
Wizardhat Universal Hydrofoil Hardware Set
This hardware set will work with any base plate or 4-bolt tracked board on the market. This included M8 or M6 base plates and tracks. There is no more need...
$36.00
FoilMount, Kite Parts
One Pump Replacement Hose (by the foot)
This is replacement hose for the UV and saltwater environment. Will work on any standard one pump valve. Cut to length sold by the foot.
$6.50
Foil Accessories, FoilMount
$169.99
$129.99
FoilMount Carbon 3.0 Adhesive Hydrofoil Track System
New for 2020 is the full carbon, low profile FoilMount 3.0 Carbon. This compressed carbon plate is not only beautiful it is also incredibly strong allowing it to be thinner...
Amrstrong Foil Stuff, Armstrong
Armstrong Replacement Hardware set of 4 (stainless Steel)
This is a full set of replacement hardware for the Armstrong system (4 complete T-nuts, 25mm M6 bolts, and custom washers). Everything is stainless steel instead of the titanium made...
$29.50
Foil Accessories, FoilMount
Wizardhat Hydrofoil Hardware Set
This hardware set will work with any base plate or 4-bolt tracked board on the market. This included M8 or M6 base plates and tracks. There is no more need...
$36.00
Foil Accessories, FoilMount
M6 Stainless Steel T-nut Replacements Set of 4
These are Replacement M6 Stainless Steel T-nuts for hydrofoil track systems. They work for Takuma hydrofoil setups and other baseplates that require M6 bolts. Super low profile. These are hard...
$13.00
Foil Accessories, FoilMount
Stainless Steel Hydrofoil Track Hardware Set-Torx
Stainless Hydrofoil Track Hardware set Includes M8 X 25mm - Flat Head Bolts with Torx T-40 (See Pictures) - 4 Qty M8 Low Profile Stainless T-Nuts - 4 Qty FoilMount...
$19.99
Foil Accessories, FoilDrive Accessories
Stainless Steel Torx Tools
These are T30 and T40 torx tools for all M8 and M6 foil hardware. The tool is made from Stainless steel so will not rust.
Torx Hardware
$4.00
FoilMount, Hydrofoil
$4.50
$3.25
M6 Stainless Steel Hydrofoil T-nuts
These are standard M6 Hydrofoil T-nuts that will work with any M6 Hydrofoil such as F-one, Armstrong, Takuma, etc.
Foil Accessories, FoilMount
GoFoil and Standard Deep Tuttle Adapter Plate for 4-bolt System
This is a dual purpose adapter plate that will accommodate both the GoFoil Symmetrical deep tuttle and the standard Deep tuttle. The adapter includes "drop-in" fastening slots for easy in and...
$169.00
Foil Accessories, FoilMount
Stainless Steel M8 Socket Bolts Allen Key drive
These socket head shoulder bolts are used in various hydrofoils and adapters. Select the size and qty you would like to buy. Measure length of bolt from the bottom of...
$2.00
Foil Accessories, FoilMount
Wizardhat T-bolt sets in various lengths (4 qty)
These are M6 diameter 316 Stainless Steel T-bolts to be used with the wizard hat hardware set in various sizes. These come in sets of 4 in each pack. They...
$8.00
FoilMount
FoilMount 3M 94 Primer adhesion promoter
Applicator stick good for one foilmount installation.
$2.99
Foil Accessories, FoilMount
Replacement Hoverglide Mast to Fuselage Bolts
M8 x 45mm Stainless steel socket head bolts
$8.50
Foil Accessories, FoilMount
FoilMount Removal Tool (two parts)
This is the easiest way to completely remove a FoilMount from a board or other surface without damage to the mounted surface. It is a fairly quick and easy procedure consisting...
$40.00
FoilMount, Hydrofoil Hardware
M6 to M8 Converter Washer 4 qty
These are washers that fit into M8 countersunk holes and converts them to use an M6 flat head bolt. They also work perfectly with the wizard hat hardware set to...
$10.00
FoilMount, Hydrofoil Hardware
Wizardhat Universal Hardware Set 25mm - no wrench
This hardware set will work with any base plate or 4-bolt tracked board on the market. This included M8 or M6 base plates and tracks. There is no more need...
$36.00
FoilMount, Hydrofoil Parts
Titanium Moses to Slingshot Adapter Bolts
These are 11mm diameter head and 8mm diameter bolt. This bolt is one of two that connects the Moses to Slingshot adapter plate to the Slingshot mast. sold per each.
$8.50
Foil Accessories, FoilMount
Brass M8 Hydrofoil Track Hardware Set- Phillips
Brass Hydrofoil Track Hardware set Includes: M8 X 25mm - Flat Head Bolts with Phillips #3 (See Pictures) - 4 Qty M8 Brass T-Nuts - 4 Qty FITS ALL SLINGSHOT , LIFT...
$15.99
FoilMount, Hydrofoil Parts
Wizard Hat Cone nuts only (each)
Stainless Steel M6 Cone nuts. Sold per each.
$4.50
FoilMount, Kiteboard Accessories
G10 40mm Kiteboard Fins set of 4 with hardware
These are new 40mm G10 kiteboarding fins. The mounting bolts are M6 and 1.5" from bolt center to center.
$45.00
Foil Accessories, FoilMount
$169.00
$45.00
Demo Deep Tuttle adapter
This was used one time and is in like new condition. Converts a deep tuttle to a 4-bolt plate. includes no hardware.
