These are extra stainless steel M8 bolts for your hydrofoil setup.  Sold as each. These are all countersunk flat head Stainless Metric Bolts in various sizes.  We can tell you...

These are extra stainless steel M8 bolts for your hydrofoil setup.  Sold as each. These are all countersunk flat head Stainless Metric Bolts in various sizes.  We can tell you...

Extra brass T-nuts for your tracked hydrofoil.  These are salt water approved and perfect for all Liquid Force, Lift, Slingshot, etc track systems.  They are M8 standard metric threads which...

Extra brass T-nuts for your tracked hydrofoil.  These are salt water approved and perfect for all Liquid Force, Lift, Slingshot, etc track systems.  They are M8 standard metric threads which...

These are low profile replacement M8 Stainless Steel T-nuts for the any hydrofoil that uses the M8 T-nut, which just about all Tracked hydrofoils.These are low profile meaning they are...

These are low profile replacement M8 Stainless Steel T-nuts for the any hydrofoil that uses the M8 T-nut, which just about all Tracked hydrofoils.These are low profile meaning they are...

Protect yourself and your foil wings while they are out of the water with this durable and soft neoprene foil wing cover.

Protect yourself and your foil wings while they are out of the water with this durable and soft neoprene foil wing cover.

The Slingshot Hover Glide Carbon Rear Wing Stabilizer is a key component of the Slingshot Hover Glide wakefoils. The 48cm wing is ideally paired with larger wings like the Infinity 84, while the 42cm...

The Slingshot Hover Glide Carbon Rear Wing Stabilizer is a key component of the Slingshot Hover Glide wakefoils. The 48cm wing is ideally paired with larger wings like the Infinity 84, while the 42cm...

These are extra stainless steel M6 bolts for your hydrofoil setup. These are all countersunk flat head Stainless Metric Bolts in various sizes.  We can tell you what size you...

These are extra stainless steel M6 bolts for your hydrofoil setup. These are all countersunk flat head Stainless Metric Bolts in various sizes.  We can tell you what size you...

Use any size Slingshot mast with your Moses setup.  All Slingshot flight school masts 15", 24", 30", full length 35.4" kite mast, or 28" surf mast will work with this...

Use any size Slingshot mast with your Moses setup.  All Slingshot flight school masts 15", 24", 30", full length 35.4" kite mast, or 28" surf mast will work with this...

2016 Hoverglide Hydrofoil Mast Base Plate.This is an extra base plate for your hoverglide hydrofoil.If you get the flight school you will want one of these to make it easier...

2016 Hoverglide Hydrofoil Mast Base Plate.This is an extra base plate for your hoverglide hydrofoil.If you get the flight school you will want one of these to make it easier...

71 cm (28 in.) Aluminum Mast fits all H series Slingshot Foil set ups.  With a Moses adapter, sold separately, this mast can also be used with the Ghost Whisperer and Moses...

71 cm (28 in.) Aluminum Mast fits all H series Slingshot Foil set ups.  With a Moses adapter, sold separately, this mast can also be used with the Ghost Whisperer and Moses...

A Stainless Steel alternative to the Titanium (expensive) hardware set. These all have large phillips head or large #6 allen-head drives so they are very hard to strip.They are made...

A Stainless Steel alternative to the Titanium (expensive) hardware set. These all have large phillips head or large #6 allen-head drives so they are very hard to strip.They are made...

46 cm (18 in.) Aluminum Mast fits all H series Slingshot Foil set ups. With a Moses adapter, sold seperately, this mast can also be used with the Ghost Whisperer and...

46 cm (18 in.) Aluminum Mast fits all H series Slingshot Foil set ups. With a Moses adapter, sold seperately, this mast can also be used with the Ghost Whisperer and...

Rear wing shim for the Hover Glide foil series. Fits either rear wing. Mounts on top of the fuselage for the 42 and mounts on the bottom of the fuselage...

Rear wing shim for the Hover Glide foil series. Fits either rear wing. Mounts on top of the fuselage for the 42 and mounts on the bottom of the fuselage...

New for 2020 is the full carbon, low profile FoilMount 3.0 Carbon. This compressed carbon plate is not only beautiful it is also incredibly strong allowing it to be thinner...

New for 2020 is the full carbon, low profile FoilMount 3.0 Carbon. This compressed carbon plate is not only beautiful it is also incredibly strong allowing it to be thinner...

2018 Slingshot Hover Glide Foil Switch Fuse Fuselage (610mm) Find your personal comfort zone. The ability to adjust the wing position fore or aft in relationship to your stance is...

2018 Slingshot Hover Glide Foil Switch Fuse Fuselage (610mm) Find your personal comfort zone. The ability to adjust the wing position fore or aft in relationship to your stance is...

STABILIZER - 325 MM " FREESTYLE " After a deep optimization process we obtained the Stabilizer 325. This solution match perfectly the W550 - W548 front wing . This stabilizer...

STABILIZER - 325 MM " FREESTYLE " After a deep optimization process we obtained the Stabilizer 325. This solution match perfectly the W550 - W548 front wing . This stabilizer...

M8 Stainless Flat head bolts with a 1.25 thread pitch.These are the standard Metric bolts used on most hydrofoil boards.  All have a large #4 phillips head drive.   The...

M8 Stainless Flat head bolts with a 1.25 thread pitch.These are the standard Metric bolts used on most hydrofoil boards.  All have a large #4 phillips head drive.   The...

Replacement mast cap for all Hover Glide foil systems.

Replacement mast cap for all Hover Glide foil systems.

Slingshot 24" (61cm) Aluminum Foil Mast 24" mast Slingshot's 24" mast is ideal for use behind a boat and in the surf as well as an excellent learning mast for...

Slingshot 24" (61cm) Aluminum Foil Mast 24" mast Slingshot's 24" mast is ideal for use behind a boat and in the surf as well as an excellent learning mast for...

M8 x 25mm Stainless steel socket mast cap bolts they are a little longer so you get more of the bolt threads to hold the cap on.

M8 x 25mm Stainless steel socket mast cap bolts they are a little longer so you get more of the bolt threads to hold the cap on.

These wings fit the 749 Surf/Sup Fuselages Only 633 Surf/SUP pump wingFRONT WING SURF - SUP - PUMP  FeaturesHigh modulus carbon  CompatibilityThis wing can be mounted on the MFS-18 Fuselage. ...

These wings fit the 749 Surf/Sup Fuselages Only 633 Surf/SUP pump wingFRONT WING SURF - SUP - PUMP  FeaturesHigh modulus carbon  CompatibilityThis wing can be mounted on the MFS-18 Fuselage. ...

These wings WILL fit on any hoverglide fuselage all the way back to 2016, This is the front wing of the F-Sup. Its the biggest wing in the line-up, making...

These wings WILL fit on any hoverglide fuselage all the way back to 2016, This is the front wing of the F-Sup. Its the biggest wing in the line-up, making...

These wings will work on any of the Hoverglide fuselage as far back as 2016. F-SURF-Ride waves the way you want to not the way you have to. Easy to...

These wings will work on any of the Hoverglide fuselage as far back as 2016. F-SURF-Ride waves the way you want to not the way you have to. Easy to...

This cover is designed for Moses front wings measuring 633 to 683. 

This cover is designed for Moses front wings measuring 633 to 683. 

This is a mast cover for the full length Mast 35.4" long.  Includes velcro down the seam.

This is a mast cover for the full length Mast 35.4" long.  Includes velcro down the seam.

Set of 4. M6x23 self-tapping screw, compatible with all 2013 - current Slingshot surfboards.  

Set of 4. M6x23 self-tapping screw, compatible with all 2013 - current Slingshot surfboards.  

90 cm (35.4 in.) Aluminum Mast fits all H series Slingshot Foil set ups.  With a Moses adapter, sold separately, this mast can also be used with the Ghost Whisperer and Moses...

90 cm (35.4 in.) Aluminum Mast fits all H series Slingshot Foil set ups.  With a Moses adapter, sold separately, this mast can also be used with the Ghost Whisperer and Moses...

New light weight base plate with drop in slots.

New light weight base plate with drop in slots.

Best lube/anti-corrosion product for hydrofoil parts and pieces.  Will not dry out over time and can be used on all foils.  Also, does not attract sand and dirt.     ...

Best lube/anti-corrosion product for hydrofoil parts and pieces.  Will not dry out over time and can be used on all foils.  Also, does not attract sand and dirt.     ...

Small-     For quick kiting or overhead waves.  Medium- For small riders, wanting to do slow stuff, or kiters wanting to a speed somewhere between the Large and Small, or...

Small-     For quick kiting or overhead waves.  Medium- For small riders, wanting to do slow stuff, or kiters wanting to a speed somewhere between the Large and Small, or...

These are Replacement M6 Stainless Steel T-nuts for hydrofoil track systems. They work for Takuma hydrofoil setups and other baseplates that require M6 bolts. Super low profile. These are hard...

These are Replacement M6 Stainless Steel T-nuts for hydrofoil track systems. They work for Takuma hydrofoil setups and other baseplates that require M6 bolts. Super low profile. These are hard...